Difference between revisions of "Gross processing"

From patholines.org
Jump to navigation Jump to search
m (Note)
(Identity)
Line 7: Line 7:
 
{{Comprehensiveness}}
 
{{Comprehensiveness}}
  
 +
*Confirm that the patient '''identity''' on the specimen container matches the identity that will be applied to the gross description and cassettes.
 
*Generally '''measure''' estimated volume or 3 dimensions for samples greater than 0.4 cm in greatest dimension.<ref group=notes>Specifying dimensions in 3 dimensions is generally a waste of time for specimens less than 0.4 cm.</ref>
 
*Generally '''measure''' estimated volume or 3 dimensions for samples greater than 0.4 cm in greatest dimension.<ref group=notes>Specifying dimensions in 3 dimensions is generally a waste of time for specimens less than 0.4 cm.</ref>
 
*{{Comprehensive-begin}}Note the color of the sample, even when unremarkable.{{Comprehensive-end}}<ref group=notes>The color is generally of little consequence.</ref>
 
*{{Comprehensive-begin}}Note the color of the sample, even when unremarkable.{{Comprehensive-end}}<ref group=notes>The color is generally of little consequence.</ref>

Revision as of 14:59, 24 July 2020

Author: Mikael Häggström [note 1]

General notes edit

Further reading:

Following are general notes on selection and trimming in pathology.

Comprehensiveness

On this resource, the following formatting is used for comprehensiveness:

  • Minimal depth
  • (Moderate depth)
  • ((Comprehensive))
  • Confirm that the patient identity on the specimen container matches the identity that will be applied to the gross description and cassettes.
  • Generally measure estimated volume or 3 dimensions for samples greater than 0.4 cm in greatest dimension.[notes 1]
  • ((Note the color of the sample, even when unremarkable.))[notes 2]
  • Generally, use inking for resection margins where cancer radicality is important.Template:Ink note Excisions made by laser do not need inking on the excision surfaces, since the coagulated surface can be easily identified in the microscope.[1]
  • (Preferably photograph or make a drawing where slices have been taken.)[2]
  • Remove any surgical stitches from samples before microtomy.
  • (At least for larger samples, consider looking for medical imaging or biopsy reports in order to better guide the process.)[3]
  • Generally, strive to make slices perpendicular to visible interfaces of relevant tissues.

Notes

  1. Specifying dimensions in 3 dimensions is generally a waste of time for specimens less than 0.4 cm.
  2. The color is generally of little consequence.
  1. For a full list of contributors, see article history. Creators of images are attributed at the image description pages, seen by clicking on the images. See Patholines:Authorship for details.

Main page

References

  1. Monica Dahlgren, Janne Malina, Anna Måsbäck, Otto Ljungberg. Stora utskärningen. KVAST (Swedish Society of Pathology). Retrieved on 2019-09-26.
  2. Monika Roychowdhury. Grossing (histologic sampling) of breast lesions. Pathologyoutlines.com. Topic Completed: 1 August 2012. Revised: 19 September 2019
  3. . Gross Pathology Manual By The University of Chicago Department of Pathology. Updated 2-14-19 NAC.

Image sources